-
Fiberglass sleeve
Fiberglass sleeve is mainly divided into two categories, which are inner fiberglass outer silicone resin ( SRG-N) and inner silicone rubber outer fiberglass( SRG-W). SRG-N is made of no-alkali fiberglass yarn woven into the tube, and then coated with silicone resin by high temperature treatment. Because of its flame resistance, wear resistance, tear resistance, flexible, insulation, SRG-N is applied in the areas such as internal wiring of electronics, electrical appliances and automotive, motors, household appliances, etc. SRG-W is extruded into tubes by silicone rubber, which is wrap the woven fiberglass ,and then coated with silicone resin at high temperature. Due to its excellent high temperature-insulation performance, SRG-W is also widely used in electronic appliances, lighting, industrial machinery, heating products and other high temperature place.
-
0.000.00
-
Fiberglass sleeve is mainly divided into two categories, which are inner fiberglass outer silicone resin ( SRG-N) and inner silicone rubber outer fiberglass( SRG-W). SRG-N is made of no-alkali fiberglass yarn woven into the tube, and then coated with silicone resin by high temperature treatment. Because of its flame resistance, wear resistance, tear resistance, flexible, insulation, SRG-N is applied in the areas such as internal wiring of electronics, electrical appliances and automotive, motors, household appliances, etc. SRG-W is extruded into tubes by silicone rubber, which is wrap the woven fiberglass ,and then coated with silicone resin at high temperature. Due to its excellent high temperature-insulation performance, SRG-W is also widely used in electronic appliances, lighting, industrial machinery, heating products and other high temperature place.
Item | Performance index | |
Operating temperature | -40℃~+200℃ | |
Temperature tolerance | 265℃±2℃*168h≥1/2 Original voltage value | |
Thermal ageing test | 250℃*24h, No crack | |
Cold bend | No Crack | |
Vertical flame test | VW-1 | |
Volume resistivity | ≥1011 ΩNaN | |
Environmental standards | RoHS, REACH | |
Color | General color : White. | |
Type | Thermal resistance level (℃) | Average voltage resistance (V) | Minimum voltage resistance (V) |
SRG-N-12 | -40℃~+200℃ | 1200 | 800 |
SRG-N-15 | -40℃~+200℃ | 1500 | 1000 |
SRG-N-25 | -40℃~+200℃ | 2500 | 1800 |
SRG-N-40 | -40℃~+200℃ | 4000 | 3000 |
SRG-N-70 | -40℃~+200℃ | 7000 | 5000 |
SRG-N（ Fiber inside rubber outside ） Fiberglass sleeving dimension | |||||||
Inner diameter （mm） | Allowance （mm） | Min W.T.(mm) | Packing standard | ||||
SRG-N-12 | SRG-N-15 | SRG-N-25 | SRG-N-40 | SRG-N-70 | (m/r) | ||
Φ1.0 | +0.3，-0.1 | ≥0.20 | ≥0.23 | ≥0.25 | ≥0.35 | ≥0.37 | 200 |
Φ1.5 | +0.3，-0.1 | ≥0.20 | ≥0.23 | ≥0.25 | ≥0.35 | ≥0.37 | 200 |
Φ2.0 | +0.3，-0.1 | ≥0.20 | ≥0.23 | ≥0.25 | ≥0.35 | ≥0.37 | 200 |
Φ2.5 | +0.3，-0.1 | ≥0.20 | ≥0.23 | ≥0.25 | ≥0.35 | ≥0.37 | 200 |
Φ3.0 | +0.3，-0.1 | ≥0.23 | ≥0.25 | ≥0.27 | ≥0.37 | ≥0.40 | 100 |
Φ3.5 | +0.3，-0.1 | ≥0.23 | ≥0.25 | ≥0.27 | ≥0.37 | ≥0.40 | 100 |
Φ4.0 | +0.3，-0.1 | ≥0.23 | ≥0.25 | ≥0.27 | ≥0.37 | ≥0.40 | 100 |
Φ4.5 | +0.3，-0.1 | ≥0.23 | ≥0.25 | ≥0.27 | ≥0.37 | ≥0.40 | 100 |
Φ5.0 | +0.4，-0.1 | ≥0.25 | ≥0.30 | ≥0.32 | ≥0.40 | ≥0.45 | 100 |
Φ6.0 | +0.4，-0.1 | ≥0.25 | ≥0.30 | ≥0.32 | ≥0.40 | ≥0.45 | 100 |
Φ7.0 | +0.4，-0.1 | ≥0.25 | ≥0.30 | ≥0.32 | ≥0.40 | ≥0.45 | 100 |
Φ8.0 | +0.4，-0.1 | ≥0.25 | ≥0.30 | ≥0.32 | ≥0.40 | ≥0.45 | 100 |
Φ9.0 | +0.4，-0.1 | ≥0.25 | ≥0.30 | ≥0.32 | ≥0.40 | ≥0.45 | 50 |
Φ10.0 | +0.5，-0.2 | ≥0.38 | ≥0.40 | ≥0.42 | ≥0.45 | ≥0.50 | 50 |
Φ12.0 | +1.0，-1.0 | ≥0.38 | ≥0.40 | ≥0.42 | ≥0.45 | ≥0.50 | 50 |
Φ13.0 | +1.0，-1.0 | ≥0.38 | ≥0.40 | ≥0.42 | ≥0.45 | ≥0.50 | 50 |
Φ14.0 | +1.0，-1.0 | ≥0.38 | ≥0.40 | ≥0.42 | ≥0.45 | ≥0.50 | 50 |
Φ15.0 | +1.0，-1.0 | ≥0.38 | ≥0.40 | ≥0.42 | ≥0.45 | ≥0.50 | 50 |
Φ16.0 | +1.0，-1.0 | ≥0.38 | ≥0.40 | ≥0.42 | ≥0.45 | ≥0.50 | 50 |
Φ18.0 | +1.0，-1.0 | ≥0.38 | ≥0.40 | ≥0.42 | ≥0.45 | ≥0.50 | 25 |
Φ20.0 | +1.0，-1.0 | ≥0.40 | ≥0.40 | ≥0.42 | ≥0.45 | ≥0.50 | 25 |
Φ25.0 | +1.0，-1.0 | ≥0.40 | ≥0.45 | ≥0.47 | ≥0.50 | ≥0.55 | 25 |
Φ30.0 | +1.0，-1.0 | ≥0.40 | ≥0.45 | ≥0.47 | ≥0.50 | ≥0.55 | 25 |
Φ35.0 | +1.0，-1.0 | ≥0.40 | ≥0.45 | ≥0.47 | ≥0.50 | ≥0.55 | 25 |
Φ40.0 | +1.0，-1.0 | ≥0.40 | ≥0.45 | ≥0.47 | ≥0.50 | ≥0.55 | 25 |
SRG-W （Rubber inside fiber outside） Fiberglass sleeving dimension | |||
Inner diameter （mm） | Allowance （mm） | Min W.T. （mm） | Packing standard |
SRG-W-70 | (m/r) | ||
Φ1.0 | +0.20，-0.10 | ≥0.60 | 100 |
Φ1.5 | +0.30，-0.20 | ≥0.60 | 100 |
Φ2.0 | +0.30，-0.20 | ≥0.60 | 100 |
Φ2.5 | +0.30，-0.20 | ≥0.60 | 100 |
Φ3.0 | +0.30，-0.20 | ≥0.80 | 100 |
Φ3.5 | +0.30，-0.20 | ≥0.80 | 100 |
Φ4.0 | +0.40，-0.20 | ≥0.80 | 100 |
Φ4.5 | +0.30，-0.20 | ≥0.80 | 100 |
Φ5.0 | +0.40，-0.20 | ≥0.80 | 100 |
Φ6.0 | +0.40，-0.20 | ≥1.00 | 100 |
Φ7.0 | +0.50，-0.30 | ≥1.00 | 50 |
Φ8.0 | +0.50，-0.30 | ≥1.00 | 50 |
Φ9.0 | +0.50，-0.30 | ≥1.00 | 50 |
Φ10.0 | +1.00，-0.50 | ≥1.00 | 50 |
- Hot product
- Braided sleeve
- Flame-retardant telescopic braided mesh pipe
- PET high temperature flame retardant braided mesh pipe
- PA+PET weaving mesh tube
- Nylon Braided Mesh Tube
- PPS Braided Mesh Tube
- Pattern braided mesh tube
- Nylon Multifilament Braided Sleeve
- Polyester multifilament braided mesh tube
- Noise reduction braided network pipe
- Kevlar braided sleeve
- Nylon flat wire braided mesh tube Braided Sleeve
- Self-rolling textile sleeving
- Heat shrinkable braided sleeve
- Velcro Braided Sleeve
- Zipper Textile Sleeve
- Non shrink textile sleeve
- Flame-retardant telescopic braided mesh pipe
- PVC tube
- Silicone tube
- PTFE teflon tubing
- Fiberglass sleeve
- PE winding tube
- Heat shrink tube
Xingan street 1095. Baoan,
Shenzhen,Guangdong,China
Tele：+86-15820430774
Email: info@teroll.cn